The steel bar straightening and cutting machine is chiefly used for straightening and cutting certain length of cold-rolled bar, 3rd grade hot-rolled rebar and deformed cold-rolled steel bar etc. It includes two parts which are straightening part, hydraulic and cutting part. This kind of steel bar straightening machine integrates the superiorities of being highly automatic, quick pulling speed, stable cutting performance, continuous working and safe operating and so on. Furthermore, this steel bar straightener is equipped with automatic counting. Moreover, a little loss of strength will be happened after processing. There is no scratches on finished rebar.
The bar straightening and cutting machine is widely applied in construction industry like processing railway fence, highway fence, thermal insulation network and construction steel materials etc. And in the construction market, the straightening machine is warmly welcome by the customers for its high straightening accuracy and good straightening consequence. And our automatic steel bar straightening and cutting machine is in lower failure rate and precise cut to certain length. It is no crankshaft and wear. Furthermore, the machine is in stable working performance and high production efficiency, which gains a lot of people’s praises.
GT4-10 steel bar straightening and cutting machine

Parameters:
Straightening diameter: 4-10 mm
Straightening wheels: 8 pics
Speed of working: 25-35 m/min
Cutting space: 900 mm (can be longer)
Error of cutting length: ±5 mm
Motor power: 4 KW
Overall size: 1760 x 600 x 800 mm
Weight: 260 kg
Get A Free Quote
GT4-10A steel bar straightening machine

Parameters:
Straightening diameter: 4-10 mm
Straightening wheels: 8 pics
Speed of working: 25-35 m/min
Cutting space: 900 mm (can be longer)
Error of cutting length: ±5 mm
Motor power: 5.5 KW
Overall size: 1760 x 600 x 800 mm
Weight: 280 kg
Get A Free Quote
GT4-12 steel bar straightener

Parameters:
Straightening diameter: 4-12 mm
Straightening wheels: 8 pics
Speed of working: 25-35 m/min
Cutting space: 900 mm (can be longer)
Error of cutting length: ±5 mm
Motor power: 7.5 KW
Overall size: 1960 x 650 x 930 mm
Weight: 396 kg
Get A Free Quote
GTQ4-12 bar straightening and cutting machine

Parameters:
Straightening diameter: 4-12mm
Straightening wheels: 6 pics
Speed of working: 35-45 m/min
Cutting space: 900 mm (can be longer)
Error of cutting length: ±0.5 cm
Motor power: 11 KW (Single motor)
Overall size: 2200 x 700 x 1100 mm
Weight: 750 kg
Get A Free Quote
GTQ4-12A automatic steel bar straightening and cutting machine

Parameters:
Straightening diameter: 4-12mm
Straightening wheels: 6 pics
Speed of working: 35-45 m/min
Cutting space: 900 mm (can be longer)
Error of cutting length: ±0.5 cm
Motor power: 7.5 KW (Single motor)
Overall size: 2000 x 700 x 1100 mm
Weight: 550 kg
Get A Free Quote
GTQ4-14 automatic bar straightening cutting machine

Parameters:
Straightening diameter: 4-14mm
Straightening wheels: 8 pics
Speed of working: 35-42 m/min
Cutting space: 900 mm (can be longer)
Error of cutting length: ±0.5 cm
Motor power: 16 KW
Overall size: 2800 x 750 x 1160 mm
Gross Weight: 950 kg
Get A Free Quote
Features of the steel bar straightening and cutting machine
1. Higher cutting speed.
2. Lower failure rate.
3. Simple and reliable hydraulic straightening system.
4. High quality alloy steel blades and modulation wheel.
5. Hot rolling straightening frame.
6. Longer working life.
Main structure about the steel bar straightening machine
The steel bar straightener is comprised of materials feeding system, straightening system, cutting system, discharging system and electrical control system.
1. Materials feeding system
This part includes driving friction wheels and pulling friction wheels which are powered by pure copper motor. The motor, gears and chain rotate in the meantime as well as drive the front and back friction wheels to roll and finalize the procedure of material feeding.
2. Straightening system
This steel bar straightening and cutting machine’s part mainly works to straighten rebar by fast rotations of straightening barrel. Before starting the straightening and cutting machine, should modulate the position of straightening die in the straightening barrel.
3. Cutting system and discharging system
The two parts of the bar straightening machine work corporately to cut steel bars to certain length. First, the pure copper motor drives the V-belt and gears to rotate. When the straightened bar travels through the round-hole cutting blades, subsequently, reach to cut-to-length switch and touch the rocking plate of cut-to-length switch (which is fixed on the discharging table), the active cutting tool will receive a signal by electromagnetic switch. The electromagnetic switch orders the cutting blade to complete once cutting.